Skip to main content
A gateway is a Windows computer that runs the Atomscale desktop app and can reach your instruments’ data. Its integrations collect that data and upload it to Atomscale. Follow these steps to set one up. Setup takes about 10 minutes. You need your Atomscale account, and a Windows administrator for one prompt.

Before You Begin

  • An Atomscale account in the organization that will own the workstation. If you don’t have one, ask an Admin in your organization to invite you.
  • The installer, from Atomscale support.
  • A Windows 10 or later computer with internet access and access to the instruments’ data.
  • A Windows administrator to approve one prompt.
For anything else, see Troubleshooting.

Steps

1

Install the desktop app

Choose the Windows user account that will run Atomscale, and sign in to Windows as that user. The gateway runs only while that user is signed in. Run the installer with its defaults, then open Atomscale.
2

Complete first-run setup

Atomscale opens an onboarding wizard. Go through its screens:
  1. Connection: click Continue.
  2. Purpose: choose Monitor and analyze growths.
  3. Sign in with your Atomscale account.
  4. Integrations: click Add on the integration for each of your data sources:
    • RHEED camera: RHEED Camera (GenTL), or kSA 400 if kSA 400 runs your camera. Add one, not both.
    • Tool logs: Tool Log Streamer.
    • Ellipsometer: FilmSense FS-1.
    • Files an instrument saves to a folder: File Watcher.
  5. Admin access: click Enable admin access, and have the administrator approve the Windows prompt. It names Windows PowerShell, publisher Microsoft Windows, and may open behind the Atomscale window.
  6. Sharing: leave it off, and click Finish setup.
  • The admin access prompt names Windows PowerShell because Atomscale uses PowerShell to install its signed component.
  • Enable admin access even without a RHEED camera, so integrations you add later need no administrator. See Integration Admin Access.
  • Monitor and analyze growths is the full app, which you need to create Growth Instruments in step 4. Connect an instrument shows only data collection pages; choose it later under Settings > Application if no one analyzes data on this computer.
  • Turn Sharing on only if other lab computers without internet access will upload through this one. See Connection Sharing.
See First-Run Setup for every screen.
3

Configure your integrations

After you click Finish setup, the app opens on Home. Click Integrations in the icon rail on the far left. It lists the integrations you added. Those that need settings show Not configured.To have the app configure an integration for you, click Ask assistant. Tell the Gateway assistant which integration to configure and where to find the data. Ask it to leave the integration stopped until you link it to a Growth Instrument.To configure an integration yourself, select it and click Configure. Enter its settings and click Apply Configuration. Don’t start it yet. Find your data source:
RHEED Camera (GenTL) needs no settings: it finds the camera when you start it. See RHEED Camera.
4

Create a Growth Instrument and link your integrations

A Growth Instrument represents one growth system, such as your MBE chamber. Linking your integrations to it lets Atomscale group their data into growths. A new organization has none yet, so create one first:
  1. On the Integrations page, click None in an integration’s Growth Instrument column, then click + New growth instrument at the bottom of the list. The Growth Instruments page opens.
  2. Click + Growth Instrument. Enter an Instrument Label, the name you’ll choose in Atomscale, such as “Main Facility MBE #2”, and an Instrument Name, its make and model. Click Create.
  3. Click Integrations in the rail, click None again, and choose the new instrument. Choose the same instrument for every integration on this growth system.
If your growth system already has an instrument in Atomscale, skip to the last step and choose it. If you run several growth systems, create one for each.
Link each integration before its first run. Data that arrives earlier isn’t linked, so Atomscale can’t group it into a growth.
  • No Growth Instrument column: the column appears once the workstation is connected to Atomscale. Check the connection and wait a few seconds.
  • Integration not found on this gateway: the integration was added moments ago. Wait about 15 seconds and choose again.
You can also link integrations from the web app: click Gateways in the icon rail on the far left, and open this workstation. See Finding Your Data.
5

Start the integrations and check your data

On the Integrations page, click each integration and click Start Integration. Then run a growth, or acquire as usual, and check your data:
Start the integration while your RHEED software is acquiring. Its Health section shows Healthy once frames arrive, and the growth appears on Monitor. Growths shorter than 10 minutes are removed from Monitor afterward.
If data is still missing, follow Trace the Data Path.

Leave It Running

  • Close the window instead of quitting. Atomscale keeps running in the system tray (click ^ next to the clock if you don’t see its icon).
  • Stay signed in to Atomscale. Uploads pause while no one from the owning organization is signed in.
  • After a reboot, sign in to Windows as the same user.
The app updates itself. For shared or unattended computers, see Keep the Gateway Running.

You’re All Set

This computer is now an Atomscale gateway. From here on, your instruments’ data streams to Atomscale as it’s collected, with nothing to upload by hand. Growths appear live on Monitor, with RHEED and tool data side by side, and everything else lands on Data. If the network drops, the gateway keeps collecting and uploads the backlog when it reconnects.

Watch a growth live

Follow RHEED video, growth metrics, and tool state on Monitor while a growth runs.

Analyze a growth

Ask the assistant questions about a growth and build an analysis notebook.

Find your data

Find recordings and see how RHEED and tool logs from one growth are grouped.

Check on this computer remotely

See its status and manage its integrations from the web app’s Gateways page.