Skip to main content
The RHEED Camera (GenTL) integration streams frames from your RHEED camera to Atomscale while your existing RHEED software, such as kSA 400, runs the camera. Frames upload as they arrive, group into one data item per acquisition, and are analyzed live. The integration is a passive second viewer. It never starts or stops acquisition and never changes camera settings. It receives frames only while your RHEED software is acquiring, meaning live frames from the camera are updating in that software’s viewport. When the live image stops, no frames arrive. It needs the desktop app on Windows 10 or later; the Atomscale CLI doesn’t run it. If kSA 400 runs your camera, you can use the separate kSA 400 integration instead, which uploads the frames kSA 400’s Image Streamer sends. Choose one of the two for a camera.

Choose a Frame Source

The Frame Source setting decides how frames reach the integration.
A third option, Synthetic (Testing), generates test frames without a camera.

Set It Up

Network capture (GVSP Tap)

The default. Add the integration and start it; it finds the camera and tunes capture itself.

Standard capture (GenTL)

Use the vendor’s GenTL producer to open the camera as a second viewer.
After setup, check Recording Sessions to decide how frames are split into data items, for example by following kSA 400’s acquisition state. All settings are listed in the Settings Reference.

What You Get in Atomscale

Each acquisition becomes one RHEED data item named after its start time, for example RHEED Stream @ 4:15 PM, Oct 23, 2026. When the stream ends, its length is added, as in RHEED Stream @ 4:15 PM, Oct 23, 2026 · 1 h 35 min. Atomscale places each stream on a physical sample for its growth as soon as it starts. To group it with the tool log from the same growth, link the integration to a Growth Instrument; see Finding Your Data.
These pages describe RHEED Camera (GenTL) version 1.8. An integration configured with an earlier version keeps capturing exactly as before: its saved Frame Source, Capture Mode, camera address, and tuning values stay. To hand a field over to the integration, click Auto Manage next to it on the configuration page. See Auto Values.